We've broken our Washington CDL practice tests into 16 categories which will cover the entire CDL permit exam, all of the CDL endorsement exams, and your job duties as a driver.
Driving Rules And Regulations will cover the basics like who needs a CDL, CDL classifications, CDL reqiurements and disqualifications, and why special CDL endorsements are sometimes required.
Transporting Cargo will cover the different terms related to truck and cargo weights, driver responsibilities regarding overweight trucks, the safe loading of cargo, and cargo securement.
Safe Driving will cover the basics of a pre-trip inspection, basic control and backing, speed and lane control, managing space around your vehicle, and driving in poor weather conditions.
Transporting Passengers is required for the passenger endorsement and will cover the basics of a pre-trip inspection for a bus, loading and securing passenger cargo, and school bus safety.
The School Bus Endorsement is required in some states for driving a school bus. This section covers loading and unloading passengers safely, bus inspection, and regulations for passenger transport.
Air Brakes will cover the various parts of an air brake system, air brake inspection, proper braking techniques, the differences between air brakes and hydraulic brakes, and stopping distance.
Combination Vehicles is a requirement for driving a tractor trailer and will cover combination vehicle air brakes, coupling and uncoupling trailers, and combination vehicle air brake inspection.
Doubles And Triples is an endorsement needed to pull double trailers or triple trailers and will cover coupling and uncoupling of doubles and triples, inspection, and air brake tests.
Tankers is a required endorsement to pull tanker trailers or large totes of liquid and will cover the pre-trip inspection of tankers, tanker loading, and safe driving for tankers.
Hazardous Materials is an endorsement required to pull hazardous cargo and covers labels and placards, loading and unloading hazardous materials, parking and routing, and emergency response.
Pre-Trip Inspection will cover the inspection of the outside of the truck, the air brake system, inspection of the trailer, engine start and check, and driver responsibilities.
Driving Exam will cover the reqiurements for passing the CDL driving exam, the CDL driving exam scoring system, upgrades and downgrades, and the basics of the driving exam itself.
Logbook Rules is not a requirement for the CDL permit or endorsements but it's critical for doing your job. This is a very thorough section which covers all of the rules governing the logbook.
Weight Distribution is not a requirement for the permit or endorsements but is critical for doing your job. It will cover cargo loading, weight distribution, fuel calculations, and center of gravity.
Flatbed Cargo Securement is not required unless you're pulling a flatbed. This section covers tiedown components, securing devices, working load limits, and requirements for different types of freight.
Did you know you can fill out one quick form here on TruckingTruth and apply to several companies at once for paid CDL training? Seriously! The application only takes one minute. You will speak with recruiters today. There is no obligation whatsoever. Learn more and apply here:
Here are more resources related to getting your CDL in Washington:
The cost to take the knowledge test is $35 and $40 for the CLP
You must be over the age of 18 years old to drive commercial vehicles intrastate and you must be at least 21 years old to operate commercial vehicles interstate.
Each DMV location's hours vary, visit Washington's Driver licensing office locations to find the office near you.
To speed up your visit, you can prepay your fees online and make sure you bring all of your documentation with you.
To prepare for the General Knowledge Exam, it is recommended you take a certified course in CDL Training as well as CDL Practice Tests in Washington. Use the official Washington Commercial Driver's Manual as a study guide. The manual covers the following topics, which will be on the exam:
The skills test portion of the State CDL Testing process may be waived for individuals who have experience driving commercial motor vehicles for military purposes. Military personnel must meet the following requirements:
There are 8 CDL tests offered in Washington
You can take the knowledge test at any driver licensing office location that offers testing. The test fee covers one attempt at each knowledge test taken within 90 days of the receipt. You're required to take the knowledge test any time you transfer, add, or renew a hazardous material endorsement (HME).
The knowledge test is available in four languages, no interpreters are allowed; English, Spanish, Russian and Serbian–Croatian.
Click Anywhere To Close